The “two flashing led” circuit is designed for 9 Volts but it works at lower voltages too. In this design we used red leds but by changing the series resistors R1 and R4 you can also use different LED ...

This is probably the simplest idea to generate flashing light from an LED using AC. The circuit is relatively the simple way of flashing one or more LEDs from a high voltage DC obtained from Mains.

LED flasher circuit With cycling safety in mind, I bought a pair of low power red LED things that replace the bungs in the end of drop handlebars. They are a neat way to get a bit of extra visibility ...

This is a very simple but useful project, strobe navigation lights for rc airplanes, or you can adjust the flashing time and ...

Figure 2 shows the current-voltage waveform of the circuit. Here are a couple of other examples. For a 5-V, ±5% monitor, set R1 = 121 Ω and R3 = 301 kΩ.

There was a time though when a flashing LED was something of a big deal, so much so that National Semiconductor produced a dedicated chip for the task. The LM3909 boasted the ability to flash an ...