Most commonly the digital electronic systems like microcontrollers and microprocessors operate in 5V or 3.3V. Industrial Level Control devices like PLC, HMI etc. have an operating voltage of 12V, 24V ...

With the source taken care of [Glitch] uses an optoisolator for both protection and level conversion. After working the bugs out of the design he was able to control the relay using 3.3V, 5V, or 12V.

This project is a compact DC-DC buck converter designed to step down a 24V input to a 5V output using the TPS5450 buck converter IC. The size of the PCB is 27mm x 17.5mm. Cin1 10uF 50V 1210 X7R ...

README.md TS2596 24V to 5V@3A regulator This design is a simple breakout card for the TS2596 buck 40V Vin to 5V @ 3A Vout regulator. Main reason was to supply a 5V USB socket for a web cam off the 24V ...

The circuit uses a 78L05 linear regulator to decrease the power-supply voltage to 5V. The 1N4007 between the 24V dc and the 5V LM7805 regulator protects the circuit from possible power-supply wire ...

Features: >> Speed sensor signal input, shaping square wave signal output >> 200mV peak weak signal amplification and shaping >> Sine wave, sawtooth signal input, square wave signal output >> No ...

Traffic timer board block diagram Board can be divided into following blocks for easy understanding. The brief description and circuit diagram is given on following pages. 24V DC to 5V DC Traffic ...

IC-Haus introduced the iC-HD2, iC-HD7 and iC-HE line drivers for 5 V and 24 V industrial encoder/sensor applications. The output drivers are designed for cable impedances in the range of 30 to 140 ...

Features: >> Speed sensor signal input, shaping square wave signal >> 200mV peak weak signal amplification and shaping >> Sine wave, sawtooth signal input, square wave signal output >> No changing the ...