Op amps such as the TLV278X, TLC08X, and TLC07X have unity-gain-crossover frequencies of 8 and 10 MHz. With any significant loading capacitor, adding any stray input capacitance (C I in the figure ...

It incorporates the feedback capacitor that would have been an external component on early op-amp chips, and it has a couple of variable resistors to adjust the bias.

Removing the capacitors causes the circuit to degenerate to the inverting amplifier configuration (see Common op-amp circuits). Leaving the feedback capacitor, C2, in place creates an integrator or a ...

Chopper op amps offer very low offset voltage and dramatically reduce low frequency 1/f (flicker) noise. How do they do it? Here’s a quick-read on the tricks. The input stage of a chopper op amp is ...

In high-speed op-amp circuits, a parallel combination of two chip capacitors is recommended (Fig. 2a). A 1-µF tantalum and a 0.1-µF ceramic capacitor are typical.

Posted in contests, hardware Tagged Op Amp Challenge, op-amp, peak detector, sample and hold ← NASA’s Voyager Space Probe’s Reserve Power, And The Intricacies Of RTG-Based Power Systems ...