Op amps such as the TLV278X, TLC08X, and TLC07X have unity-gain-crossover frequencies of 8 and 10 MHz. With any significant loading capacitor, adding any stray input capacitance (C I in the figure ...

It incorporates the feedback capacitor that would have been an external component on early op-amp chips, and it has a couple of variable resistors to adjust the bias.

Removing the capacitors causes the circuit to degenerate to the inverting amplifier configuration (see Common op-amp circuits). Leaving the feedback capacitor, C2, in place creates an integrator or a ...

An integrator that you configure with an op amp is a simple circuit consisting of a resistor, a capacitor, and an op amp, so how can anything go wrong? In Figure 1, when Z F is a capacitor, the closed ...

Consider a differential op-amp circuit that has a positive input with gain of +5 and a negative input with gain of –5 (Fig. 1). R F was selected to be 100 kΩ.

Before you can calculate the gain of an op-amp circuit, you need to know the basic op-amp configurations. There are two main types of op-amp configurations: inverting and non-inverting.

Posted in contests, hardware Tagged Op Amp Challenge, op-amp, peak detector, sample and hold ← NASA’s Voyager Space Probe’s Reserve Power, And The Intricacies Of RTG-Based Power Systems ...

This paper proposes an alternate switched-capacitor amplifier capable of handling rail-to-rail input common-mode voltage without using a rail-to-rail op-amp. Unlike most existing switched-capacitor ...