[DIY3DTech] likes using his Ortur laser cutter for balsa wood and decided to add an air assist system to it. Some people told him it wasn’t worth the trouble, so in the video below, he compar… ...

Cut a notch at each mark, stopping halfway through the strip. Test-fit the balsa wood strips by interlocking the short pieces to the long piece at the notches. Trim the notches as needed until the ...

Cut the balsa on the mark you’ve made. 8. Repeat the last step, creating another balsa piece for the second side of that point. 9. Apply glue right on the edge of the star, outlining that one ...