The FSA551 is a high-performance dual single-pole single-throw (SPST x 2) audio switch. The Depletion Mode technology allows the device to conduct signals when there is no Vcc available and to isolate ...

Intersil's MightyMUX™ ISL43120, ISL43121, and ISL43122 ICs are high-performance single-supply dual SPST analog switches in a tiny 8-lead SOT-23 package. Intersil's MightyMUX™ ISL43120 ...

CIT Relay & Switch’s UL/CUL-recognized VM3 snap-action switches offers a choice of a single-pole, single-throw (SPST) or single-pole, double-throw (SPDT) circuit. The RoHS-compliant devices ...

The 74AHC1G66 and 74AHCT1G66 are TTL enabled single-pole single-throw analog switches. These high-speed Si-gate CMOS devices have two input/output pins (Y and Z) and an active HIGH enable input pin (E ...

Introducing ROHM’s SPST Type USB Switch IC, the BH6260MWX. BH6260MWX is a 2-channel SPST type Inverter SPST x and Inverter x 2ch analog switch. The device has an analog SW0 and SW1 port that passes ...

With an Operating Range of 30 to 8000 MHz, the F2910 is a High Linearity, Low Insertion Loss Switch That Targets a Multitude of Wireless and RF Applications Marketwired Tue, Nov 1, 2016, 4:57 AM ...

A high-current quad SPST analog switch can be configured as a full-bridge amplifier capable of driving low-power dc motors. By adding a sense resistor, an analog-to-digital converter (ADC), and a ...

A so-called X-SPST switch is proposed for high power RF-applications. Based on a differential circuit, a special characteristic of the X-SPST switch is that for the on-state the switching elements ...

The Siliconix DG451 and DG454 quad SPST CMOS analog switches feature four selectable 44V SPST switches, each with a 4Ω on-resistance and a 0.2Ω typical flatness. Requiring no logic-voltage pin, the ...

Malvern, Pa.—Vishay Intertechnology Inc. released two series of quad SPST CMOS analog switches that combine high switching speeds with high signal bandwidth for use in a wide range of switching ...

Two SPST broadband switches are reported in this paper. The proposed switches are designed using the travelling-wave topology and implemented in the 250-nm GaN HEMT process. The L- to C-band switch ...