News

Abstract: We report a method to etch multiple quartz crystal resonators in parallel to accuracy better than +/-50 ppm by measuring the sample resonant frequency with a network analyzer while the ...
In a quartz crystal, a thin slice of quartz is placed between two electrodes. An alternating voltage applied to these electrodes causes the quartz to vibrate, or oscillate, at a particular frequency.
MURATA ELECTRONICS XRCGB-M series consumer hybrid crystal family improves accuracy of less than ±100ppm. Device incorporates a quartz crystal element manufactured by Tokyo Denpa and includes Murata’s ...
Crystal resonator surpasses quartz crystals Posted on October 19, 2010 by Electronic Products Suited for wired Ethernet, HDMI, SATA, USB 3.0, and PCI-e applications, the XRCGB-M hybrid crystal ...
In general, tuning-fork crystals (typically 10 kHz to 600 kHz) are more rugged than extensional-mode crystals (520 kHz to 2.5 MHz), while AT-cut crystals (8 MHz and up) tend to be the most rugged. For ...
Although quartz crystals have ... “Practical Circuitry for Measurement and Control Problems,” Application Note 61, August 1994, Linear Technology Corp. HTS-206 specifications, Epson Corp. Tags Analog ...
Measurements were made of the compensated frequency stability for the resonator in a plastic molded package as it was swept twice from 40 to +85C and back to 40C. The hysteresis was less than about 50 ...
There are various resonators that are used for an immense number of applications in the field of Electronics. In those list of resonators, the two mainly used materials are quartz crystal and Ceramic ...
Simple electrical model of a fundamental-mode quartz crystal. The model shown in Figure 1 applies to fundamental-mode operation. Similar models also apply for overtone operation of crystal resonators.
We report a method to etch multiple quartz crystal resonators in parallel to accuracy better than +/-50 ppm by measuring the sample resonant frequency with a network analyzer while the sample is wet ...