Next, I soldered the various bits-and-pieces onto the microcontroller board and plugged that into the breadboard as shown below. Note that I hadn't plugged the PICAXE chip into the board at this stage ...

After struggling with the ‘245 for some time, [James] decided to swich out the BEAM circuit for a Picaxe microcontroller.

The components used to build this strobe light include a PICAXE 08M microcontroller, a 3-pin programming header, 2 pushbutton micro switches, 2 white LEDs, and 6 resistors. During the operation, the ...

The microcontroller is responsible for controlling all the other parts of the circuitry. The 8-bit microchip PIC16F886 has basic interpreter and built-in bootloader which makes it more beginner ...

It uses the classic seven segment displays, a PICAXE microcontroller and works with most engines. He’s released full source and PC board designs to boot.

Note- Parti cipants will build & test an Infrared Picaxe 8M2/14M2 Microcontrollers then choose and construct one of the following Models, of their own choice, on the day. Buy ticket Date August 27, ...

This is LED Dimmer code for a Picaxe microcontroller The readadc function is used to read the value from a potentiometer. A conversion is done to get a duty value for the pwmout function, controlling ...

PICaxe pinout I used a PICaxe 08M since I found a nice presoldered SMD version online. Since I use it as a controller for my power on LED in my NAS computer case, size mattered. pin 0 = red led pin 1 ...

Piccolo Create (PC) is a small circular (40mm diameter) wearable microcontroller board intended to be easy to use and potentially attractive to people starting out in the field of electronic ...