Check the "Static" box in the router's "Internet IP Address" or "Default Gateway" section. A text box that allows you to manually enter the gateway address is activated.

Configuring a Single Static IP Address If you purchased a single static IP address, your ISP will assign fixed values for the IP address, subnet mask and default gateway. These values will not change.

Subnet Mask (On a home network, it is 255.255.255.0) Default Gateway (It is your router’s IP address.) In the end, do not forget to check the ‘Validate settings upon exit’ option.

In the TCP/IP pane or view, if the setting for Configure IPv4 is Manually, the address was entered by hand. Check your gateway to see whether you can change the range there if you want or need to ...

It says its WAN IP is xxx.xxx.xxx.102, which is the CenturyLink "reserved gateway IP" As a test, this router's NAT clients are going out to the internet on xxx.xxx.xxx.102.

In the most basic network, your router is going to have an IP address like 192.168.0.1, and that will be called the "gateway." You'll see it pop up a lot as you look for the IP addresses of other ...

I want to install an SMTP gateway for a small network, but I've run out of unique IP's. I have a /29, and all 6 IP's are already being used.Here's a quick breakdown of the current network:- DSL ...