The solidification microstructure of an alloy strongly influences the mechanical properties. Dendritic and eutectic solidification are two important pathways of alloy solidification. The formation of ...

The influence of different Pb content on solidification behavior, formation and evolution of microstructure in mixed solder alloy were investigated. It has been shown that the onset temperature of DSC ...

The alloy was melted using an electric resistance furnace with a superheat of approximately 160°C (the liquidus temperature of the alloy is 386°C) and poured into the metal mold at room temperature.

Experimental Procedure and Results Observing the transformation behavior of the Al-Si 12 alloy at the eutectic point of 580 °C during heating and subsequent cooling was the objective of this ...

Additive manufacturing (AM) has the ability to print structures with site-specific properties. Existing AM approaches for site-specific properties are, however, based on complex ...

In this study, nanoindentation load-displacement curves of an eutectic Sn58Bi alloy were obtained. The measured elastic modulus and hardness were 40.6180 and 0.2886 GPa, respectively. To determine the ...