Nslookup uses your default DNS server to look for the IP address of website.com. If it tells you it 'Can't find website.com,' this means your DNS server doesn't have a record for that domain.

Most internet users don't think twice about their IP address, but for anyone hosting servers or accessing devices remotely, choosing between dynamic DNS and static IP is crucial for both cost and ...

Look for the line that begins with "ns2" for the address of the secondary name server:yourdomain.com nameserver = ns2.yourdomain.com n2.yourdomain.com internet address = 192.168.1.4This gives you ...

Blocking all outbound DNS queries, except from your DNS servers, at the gateway is a good way to enforce it (and a good rule in any case, since other program might try to sneak traffic out on port ...

You can also see a DNS management system as a bridge that connects domain names with computer or server IP addresses. Below we will guide you through everything you need to know about DNS management.

Note the IP Address value that has a duplicate. For instance, if you use the Google Public DNS servers, you might have two IP address values of "8.8.8.8," which is the primary Google DNS server ...

Nslookup uses your default DNS server to look for the IP address of website.com. If it tells you it 'Can't find website.com,' this means your DNS server doesn't have a record for that domain.

Under "DNS 1" put your Synology's IP, and leave DNS 2 blank. This is the setup I have to use a RPi running Pi-Hole as my DNS server, instead of my EdgeRouter or ISP, and it works well.

In the DNS Servers fields, enter the server IP addresses. (You can separately set IPv6 DNS servers if needed, but IPv4 DNS servers can provide IPv6 addresses and vice versa.

} Set-DnsClientServerAddress @Params } DNS Resolution Order Sometimes you may find that when resolving an address, you are not getting the correct results back. In this case, you may want to look at ...