News

A simple circuit modification can effectively reduce temperature-induced noise for a JFET-based amplifier at a reasonable ...
Oscillograph Voltage doubler detector A cascade voltage doubler is used to rectify the amplified AC signal. Its DC output voltage is the peak to peak of the AC voltage waveform minus the diode drops.
When using an SSR that supports zero-crossing detection, it will maintain its state until the AC output waveform crosses zero on its own. At that point it turns on or off safely. Dimming with an SSR ...
FIGURE 1 DEMONSTRATES A one-way switchedcapacitor gain stage circuit, performing a voltage gain of AO = C1/C2 only during the decreasing trail of the input signal VI (with VJ ...
Left panel, superconducting rectifier circuit used to convert AC currents into DC using four superconducting diodes (blue) connected by superconducting interconnects and one smoothing capacitor (C ...
A specific example would be a UUT (Fig. 1) powered by a 48-V dc source. The UUT typically has a dc current sink with high ac impedance implemented by the UUT’s gyrator circuit. It also has a ...